| |
|
|
Mechanical and Aerospace Engineering |
|||
| |
||||
| FILE
# |
TITLE | INVENTORS | ||
| B. Khoshnevis | ||||
| H. Wang, D. J. Phares, E. Tolmachoff | ||||
| E. S. Kim, H. Yu, C.-Y. Lee | ||||
| Eun Sok Kim, Hongyu Yu, Chuang-Yuan Lee | ||||
| Y.-J. Huang, S. R. Nutt | ||||
| B. Khoshnevis | ||||
| Improved Control for Blended-Wing-Body Airplanes | M. A. Page, Y. D. Staelens, R. F. Blackwelder | |||
| B. Khoshnevis | ||||
| Continuous Micro- and Meso-Scale Preconcentrator for Trace Gas Analyzers | E. P. Muntz, M. Young, Y. Han | |||
| Subsurface Soil Contaminant Remediation System | R. A. Khachatoorian, T. F. Yen | |||
| Chromate-Free Corrosion-Resistant Coatings for Galvanized Steel | F. Mansfeld, Y.-K. Song | |||
| Sandwich Panel Design for Low Sound Transmission | S. R. Nutt, S. Rajaram | |||
| Compact Aerosol Concentrator for Use with Low Flow-Rate Continuous Aerosol Instrumentation | C. Sioutas, P. Fine | |||
| Heavy Metal Stabilization in Soils Using Biopolymers | H.-T. Lai, T. F. Yen | |||
| Disposal of Waste CRT Glass Through the Manufacture of Concrete | D. Kim, T. F. Yen | |||
| Composite
Foam Made from Polymer Microspheres Reinforced by Long Fibers |
L. Vaikhanski, S. R. Nutt | |||
| Delay-based
Internal Model Modification Technique for High Performance Output Feedback
Control Design Tools for High-Performance Flexible Control Systems |
Z. Liu, B. Yang | |||
| Toughened
Phenolic Foam |
S. R. Nutt, H. Shen | |||
| Digital
Hormones |
W.-M. Shen, B. Salemi | |||
| Multi-Split Ring Tester | Y. Xiao | |||
| Pollution
Treatment Cells Energized by Short Pulses Repetitive Power Pulse Generator with Fast Rising Pulse |
M. Gundersen, J. Yampolsky, V. Puchkarev | |||
| Layered
Nanofabrication |
A. A. G. Requicha, B. E. Koel, R. Resch, D. Lewis, M. E. Thompson | |||
| Electrostatic
Enhancement of Capture Efficiency of Metal Filters |
C. Sioutas, S. Kim, M.-C. Chang | |||
| Micromechanical
Knudsen Compressor |
S. Vargo, E. P. Muntz, G. Shiflett | |||
| Sealing
of Anodized Aluminum with Cerium Salts |
D. Dull, F. Mansfeld | |||
| Customer
Design Based Vending System |
B. Khoshnevis | |||
| Contour
Crafting: A Novel Hybrid Rapid Prototyping Technique |
B. Khoshnevis | |||
| Method
and Apparatus for Net-Form Manufacturing |
M. E. Orme, E.P. Muntz | |||
| For additional information, please contact: Ed
Beres
Quick Links: Available Technologies | Contact | Search | Site Map | OTL Home | USC Home Webmaster
can be contacted at csantore@usc.edu.
|
||||