ABSTRACT: Stay cables, such as are used in cable-stayed bridges, are prone to vibration due to their low inherent damping characteristics. Transversely-attached passive viscous dampers have been implemented in many bridges to dampen such vibration. Several studies have investigated optimal passive linear viscous dampers; however, even the optimal passive device can only add a small amount of damping to the cable when attached a reasonable distance from the cable/deck anchorage. This paper investigates the potential for improved damping using semiactive devices. The equations of motion of the cable/damper system are derived using an assumed modes approach and a control-oriented model is developed. The control-oriented model is shown to be more accurate than other models and facilitates low-order control designs. The effectiveness of passive linear viscous dampers is reviewed. The response of a cable with passive, active and semiactive dampers is studied. The response with a semiactive damper is found to be dramatically reduced compared to the optimal passive linear viscous damper for typical damper configurations, thus demonstrating the potential benefits using a semiactive damper for absorbing cable vibratory energy.
An expanded version of this paper is available as a technical report. When possible, citation should be made to the journal paper, not the report.