University of Southern California Daniel J. Epstein Department of Industrial and Systems Engineering The USC Andrew and Erna Viterbi School of Engineering USC
Click here to email the SAE Program Click here to email the Epstein Department of Industrial and Systems Engineering
Home  |  Calendar  |  Sitemap

Azad M. Madni

Professor and Director
Systems Architecting and Engineering Program
Daniel J. Epstein Department of Industrial & Systems Engineering
University of Southern California
Los Angeles, CA 90089-0193
Phone: 213.740.3442
Fax: 213.740.1120
E-mail: azad.madni@usc.edu


Education

 Dr. Madni received his B.S., M.S., and Ph.D. in Engineering from the University of California, Los Angeles, in 1968, 1971 and 1978 respectively. He is also a graduate of the AEA/Stanford Executive Institute program for senior executives.


Experience

His research has been sponsored by DARPA, HSARPA, DHS S&T, OSD, MDA, ONR, AFOSR, AFRL, ARI, NAVAIR, NAVSEA, SPAWAR, RDECOM, CECOM, DOE, NIST, NASA, and a few others. He is an elected Fellow of the IEEE, INCOSE, SDPS and IETE, and an Associate Fellow of AIAA. He has received numerous awards from DoD, and the commercial sector, and professional societies, including the SBA’s National Tibbetts’ award for California, Blue Chip Enterprise award for California from Mass Mutual and the US Chamber of Commerce, the C.V. Ramamoorthy Distinguished Scholar Award in 2006, the President’s award in 2008 from the Society of Design and Process Science and Developer of the Year award in 2000, and 2004 from the Technology Council of Southern California. He is editor-in-chief of the Journal of Integrated Design and Process Science and serves on the editorial board of several other journals. He is listed in Who’s Who in Science and Engineering, Who’s Who is Industry and Finance and Who’s Who in America.


Research Interests

Intelligent systems engineering, complex engineered systems, adaptive architectures, human-centered design, systems architecting, modeling, simulation and analyses.  


Teaching Experience

Developed and taught several national and international courses including:

  • Integrated Cost Modeling, USC SAE lecture (part of SAE 599)
  • Infusion of Cognitive Engineering into Systems Engineering, USC SAE lecture (part of SAE 549)
  • Creating “Sweaty Palms Effect” Through Modeling and Simulation Technology (U.S. Navy, Center for Surface Combat Systems)
  • Process Modeling and Simulation for Manufacturing, and Concurrent Design/Engineering (Hughes Aircraft Company, Raytheon Company, Northrop Grumman Corporation, Amgen, SPAWAR)
  • Developing and Managing High Performance Organizations (U.S. Navy, SPAWAR Systems Center)
  • Intelligent Systems Technologies: Current Status and Future Prospects, Tel Aviv, Israel (Israel Aircraft Industry, Israeli Air Force, Tadiran)
  • Battlefield Artificial Intelligence and Robotics. State of the Arts Seminar/ IDEA (London, Paris, Munich, D.C., Boston, Orlando, Los Angeles)
  • SDI Information Management, UCLA Extension
  • Intelligent Interfaces in Man-Machine Systems, UCLA Extension
  • Smart Systems and Human Factors in Battlefield Robotics, UCLA Extension
  • Decision Aids Technology: Concepts, Systems and Applications, UCLA Extension
  • Kalman Filtering Theory and Applications, Rockwell International



Professional Societies and Service

  • Member of INCOSE Corporate Advisory Board
  • Institute of Electrical and Electronics Engineers (IEEE)
  • Member of Administrative Committee of IEEE SMC (Institute of Electrical and Electronics Engineers, Systems, Man, and Cybernetics Society), 1985-1987
  • General Chair of 1990 IEEE International Conference on Systems, Man, and Cybernetics
  • Program Chair of 1990 IEEE International Conference on Systems, Man, and Cybernetics
  • International Council on Systems Engineering (INCOSE)
  • Member of INCOSE’s Fellow Selection Committee
  • Member of Intelligent Enterprise Working Group, INCOSE
  • Member of Resilience Engineering Working Group, INCOSE
  • Member of Motor Sports Working Group, INCOSE
  • Society for Design and Process Science (SDPS)
  • Editor-in-Chief of SDPS (Society for Design and Process Science) Journal
  • President, SDPS (Society for Design and Process Science) 2006-2008
  • Institution of Electronics and Telecommunication Engineers (IETE)
  • American Institute for Aeronautics and Astronautics (AIAA)
  • Editorial Board of Human Factors and Ergonomics in Manufacturing (HFEM)
  • Technology Council of Southern California (TCSC)
  • USC Center for Systems and Software Engineering (CSSE)
  • Program Committee Member of several National and International Conferences (CERC (Concurrent Engineering Research Center), FAIM (Forum for Artificial Intelligence in Management), IEEE SMC (The Institute of Electrical and Electronics Engineers, Systems, Man, and Cybernetics Society), INCOSE (International Council on Systems Engineering), ICSE (International Conference on Systems Engineering), IJCAI (International Joint Conferences on Artificial Intelligence))
  • General Chair of 2006 Ninth World Conference on Integrated Design and Process Technology
  • Technical Program Chair of 2008 Conference on Systems Engineering Research (CSER)
  • Member of Industrial Advisory Board of Systems Architecting and Engineering (SAE) Program, Epstein Department of Industrial and Systems Engineering, Viterbi School of Engineering, University of Southern California
  • Member of Visiting Advisory Council (VAC), Epstein Department of Industrial and Systems Engineering, University of Southern California
  • Past Member of Dean’s Council, Henry Samueli School of Engineering, University of California, Los Angeles
  • Industry Affiliate of Center of Systems and Software Engineering, Viterbi School of Engineering, University of Southern California



Honors and Awards

  • Elected Fellow of Institute of Electrical and Electronics Engineering (IEEE)
  • Elected Fellow of International Council on Systems Engineering (INCOSE)
  • Elected Fellow of Society for Design and Process Science (SDPS)
  • Elected Fellow of the Institution of Electronics and Telecommunication Engineers (IETE)
  • Elected Associate Fellow of American Institute for Aerospace and Aeronautics (AIAA)
  • 2008 President’s Award from the Society of Design and Process Science at Eleventh World Conference on Integrated Systems, Design and Process Science
  • Special Commendation from the Viterbi School of Engineering for Performance as Technical Chair of 2008 CSER
  • 2006 C.V. Ramamoorthy Distinguished Scholar Award from the Society of Design and Process Science at the Ninth World Conference on Integrated Design and Process Technology
  • 2004 Developer of the Year Award from the Technology Council of Southern California
  • Sustained Excellence by a Performer, 2004 DARPATech, selected by Information Processing Technology Office (IPTO)
  • Significant Technical Achievement, 2004 DARPATech, selected by Information Processing Technology Office (IPTO)
  • 2000 Developer of the Year Award from the Technology Council of Southern California
  • 2000 Blue Chip Enterprise Award for entrepreneurship from Mass Mutual and U.S. Chamber of Commerce
  • Distinguished CEOs of Computerworld’s Top 100 Emerging Companies to Watch (2000)
  • SBA’s National Tibbetts Award for California for Excellence in Technology Innovation (1999)
  • Keynote & Plenary Speaker at several International and National Conferences (e.g., CSER, IEEE SMC, INCOSE, HAAMAHA)
  • Listed in Marquis Who’s Who in Science and Engineering, Who’s Who in Industry and Finance, and Who’s Who in America



Refereed Journal Articles in Print or Accepted for Publication (names listed in order of authorship)

  1. Madni, A.M. “Towards a Generalizable Aiding-Training Continuum for Human Performance Enhancement,” INCOSE Journal of Systems Engineering, (accepted for publication), 2009.
  2. Moini, A., and Madni, A.M. “Leveraging Biometrics for User Authentication in Online Learning: A Systems Perspective,” IEEE Systems Journal, Special issue on Biometrics Systems, (accepted for publication), 2009.
  3. Madni, A.M. “Integrating Humans with Software and Systems: Technical Challenges and a Research Agenda,” INCOSE Journal of Systems Engineering, Vol. 13, No. 3, 2010.
  4. Madni, A.M., and Jackson, S. “Towards a Conceptual Framework for Resilience Engineering,” IEEE Systems Journal, Special issue on Resilience Engineering, Paper No. 132, 2008 (accepted for publication).
  5. Madni, A.M. with Valerdi, R., Axelband, E., Baehren, T., Boehm, B., Dorenbos, D., Jackson, S., Nadler, G., Robitaille, P., and Settles, S. “A Research Agenda for Systems of Systems Architecting,” International Journal System of Systems Engineering, Vol. 1, Nos. 1/2, pp. 171-188, 2008.
  6. Madni, A.M. “AgileTecting™: A Principled Approach to Introducing Agility in Systems Engineering and Product Development Enterprises,” Journal of Integrated Design and Process Science, Vol. 12, No. 4, December 2008.
  7. Sorensen, B.H., Madni, A.M., and Madni, C.C. “Decision Superiority Process Model,” Journal of Integrated Design and Process Science, Vol. 12, No. 4, December 2008, pp. 37-46. 
  8. Madni, A.M., and Madni, C.C. “Intelligent Agents as Synthetic Role Players in Scenario-Based Training,” Journal of Integrated Design and Process Science, Vol. 12, No. 1, March 2008, pp. 41-56.
  9. Andrecut, M., Madni, A.M., Este, R.A., and Kauffman, S.A. “Evidence of Scale-Free Topology in Gene Regulatory Network of Human Tissues,” International Journal of Modern Physics C, Vol. 19, Issue 02, pp. 283-290, 2008.
  10. Madni, A.M., and Andrecut, M. “Efficient Heuristic Approach to the Weapon Target Assignment Problem,” Journal of Aerospace Computing, Information, and Communication, (accepted for publication, 2009).
  11. Madni, A.M., and Andrecut, M. “Design and Implementation of a Gene Network Reverse Engineering Method Based on Mutual Information,” Journal of Integrated Design and Process Science, Vol. 11, No. 3, September 2007, pp. 55-68.
  12. Andrecut, M., and Madni, A.M. “Pressure-rate Deconvolution with Non-orthognal Dictionaries of Exponential Functions,” Journal of Integrated Design and Process Science, Vol. 11, No. 4, 2007, pp. 41-63.
  13. Salasin, J., and Madni, A.M. “Metrics for Service Oriented Architecture (SOA) Systems: What Developers Should Know,” Journal of Integrated Design and Process Science, Vol. 11, No. 2, June 2007, pp. 55-71.
  14. Madni, A.M., and Moini, A. “Viewing Enterprises as Systems-of-Systems (SoS): Implications for SoS Research,” Journal of Integrated Design and Process Science, Vol. 11, No. 2, June 2007, pp. 3-14.
  15. Madni, A.M. “Transdisciplinarity: Reaching beyond Disciplines to Find Connections,” Journal of Integrated Design and Process Science, Vol. 11, No. 1, March 2007, pp. 1-11.
  16. Madni, A.M. “Architecture Follies: Common Misconceptions and Erroneous Assumptions,” Fellows’ Insight, INCOSE INSIGHT, Vol. 11, No. 1, pp. 33-34, January 2008.
  17. Madni, A.M. “The Intellectual Content of Systems Engineering: A definitional Hurdle or Something More?” Fellows’ Insight, INCOSE INSIGHT, Vol. 9, No.1, 2006.
  18. Madni, A.M., Lin, W., and Madni, C.C. “IDEON™: An Extensible Ontology for Designing, Integrating, and Managing Collaborative Distributed Enterprises in Systems Engineering,” The Journal of the International Council on Systems Engineering, Vol. 4, No. 1, 2001.
  19. Madni, A.M. “Thriving on Change through Process Support: The Evolution of the ProcessEdge™ Enterprise Suite and TeamEdge™,” International Journal on Information ٠ Knowledge ٠ Systems Management, Special Issue Vol. 2, No. 1, Spring, 2000.
  20. Madni, A.M. “The Role of Human Factors in Expert Systems Design and Acceptance,” Human Factors Journal, August, 1988, 30(4), 395-414.
  21. Lyman, J., and Madni, A.M. “Operator Roles in Robotics,” Robotics Age, January 1984.
  22. Madni, A.M., Samet, M.G., and Freedy, A. “A Trainable On-Line Model of the Human Operator in Information Acquisition Tasks,” IEEE Transactions of Systems, Man, and Cybernetics, Special issue on Human Factors in Computer Management of Information for Decision Making, Vol. SMC-12, No. 4, July/August, 1982, pp. 504-511.
  23. Madni, A.M., and Chadwick, M.C. “Shuttle Navigation Systems,” Journal of the Institute of Navigation, Volume 25, No. 1, pp. 80-84, Spring, 1978



Book Chapters (names listed in order of authorship)

  1. Madni, A.M. Assessment of Enabling Technologies for Computer-Aided Concurrent Engineering (CACE), Technology Assessment in Software Applications, (Eds.: Harold F. O'Neil Jr. and Eva L. Baker) Lawrence Erlbaum Associates, 1994, pp. 131-152.
  2. Madni, A.M., and Freedy, A. Intelligent Interfaces for Human Control of Advanced Automation and Smart Systems in Human Productivity Enhancement, Training and Human Factors in Systems Design, Vol. 1, (Ed.: J. Zeidner), pp. 318-331, Praeger, 1986.
  3. Madni, A., Samet, M., and Purcell, D. Adaptive Models in Information Management, Applications in Artificial Intelligence (Ed.: S. Andriole), Petrocelli Books, Inc., Princeton, NJ, 1985, pp. 279-294.
  4. Freedy, A., Madni, A., and Samet, M. Adaptive User Models: Methodology and Applications in Man-Computer Systems, Vol. 2, (Ed.: W.B. Rouse) Jai Press Inc., 1985, pp. 249-293.



Refereed Conference Proceedings (names listed in order of authorship) 

  1. Madni, A.M. and Madni, C.C. “Rapid Scenario Building and Optimization for Simulation-based Exercises,” 2009 Proceedings of IEEE International Conference on Technologies for Homeland Security, Waltham, MA, May 11 – 13, 2009.
  2. Sorensen, B.H., Madni, A.M., and Madni, C.C. “Decision Superiority Process Model,” Proceedings of the Integrated Design and Process Technology, (IDPT-2008), Taichung, Taiwan, June 1-6, 2008.
  3. Andrecut, M. and Madni, A.M. “Sparse Network Reconstruction via Compressed Sensing,” Conference on System Engineering Research (CSER), 2008.
  4. Earnest, L. and Madni, A.M. “Towards Standardizing and Accelerating Systems Engineering Processes,” Conference on System Engineering Research (CSER), 2008.
  5. Moini, A., Madni, A.M., and Ciardo, G. “A Hybrid Modeling and Simulation Formalism for Static and Dynamic Analysis of DoDAF Architecture,” Conference on System Engineering Research (CSER), 2008.
  6. Sorensen, B. and Madni, A.M. “Information Systems Model for Decision Makers,” Conference on System Engineering Research (CSER), 2008.
  7. Madni, A.M. “Agile Systems Architecting: Placing Agility Where it Counts,” Conference on Systems Engineering Research (CSER), 2008.
  8. Capell, P. and Madni, A.M. “Complexity and Architecture,” Conference on Systems Engineering Research (CSER), 2008.
  9. Axelband, E., Baehren, T., Boehm, B., Brown, W., Colbert, E., Dorenbos, D., Jackson, S., Madni, A.M., Nadler, G., Robertson, R., Robitaille, P., Settles, S., Tran, T., and Valerdi, R. “A Research Agenda for Systems of Systems Architecting,” Proceedings of the 2007 INCOSE International Symposium, San Diego, CA, June 24-28, 2007.
  10. Madni, A.M., Madni, C.C., and Sorensen, B.H. “Simulation-Based Context-Sensitive Learning of Leadership Skills,” Proceedings of the Integrated Design and Process Technology, (IDPT-2007), Antalya, Turkey, June 3-8, 2007.
  11. Madni, A.M., Moini, A., and Madni, C.C. “Towards a Executable Specification-driven Toolset for Analyzing DoDAF-Compliant Architectures,” Proceedings of the Ninth World Conference on Integrated Design and Process Technology, (IDPT-2006), San Diego, CA, June 25-30, 2006.
  12. Manary, J. and Madni, A.M. “Process Architecture: The Key to Systematic Process Tailoring and Reuse on Systems Engineering Projects,” Proceedings of the Ninth World Conference on Integrated Design and Process Technology, (IDPT-2006), San Diego, CA, June 25-30, 2006.
  13. Stelling M. and Madni, A.M. “Risk Management: The Practitioner’s Perspective,” Proceedings of the Ninth World Conference on Integrated Design and Process Technology, (IDPT-2006), San Diego, CA, June 25-30, 2006.
  14. Zarnow, D.F. and Madni, A.M. “Designing Processes to Minimize Human Behavior Variability During Process Execution,” Proceedings of the Ninth World Conference on Integrated Design and Process Technology, (IDPT-2006), San Diego, CA, June 25-30, 2006.
  15. Mayk, I. and Madni, A.M. “The Role of Ontology in System-of-Systems Acquisition,” Proceedings of the 2006 Command and Control Research and Technology Symposium, San Diego, CA, June 20-22, 2006.
  16. Madni, A.M., Sorensen H.B., and Madni, C.C. “Learning Outcome-driven Simulation for Teaching Time-stressed Decisionmaking and C2 Information Systems Usage,” Proceedings of the 2005 IEEE International Conference on Systems, Man, and Cybernetics, October 10-12, 2005, Hawaii.
  17. Ring, J. and Madni, A.M. “Key Challenges and Opportunities in ‘System of Systems’ Engineering,” Proceedings of the 2005 IEEE International Conference on Systems, Man, and Cybernetics, October 10-12, 2005, Hawaii.
  18. Madni, A.M., Sage, A. and Madni, C.C. “Infusion of Cognitive Engineering into Systems Engineering Processes and Practices,” Proceedings of the 2005 IEEE International Conference on Systems, Man, and Cybernetics, October 10-12, 2005, Hawaii.
  19. Madni, A. Madni, C., Garcia, S. Sorensen H.B. “Intelligent Agents for Individual and Team Training Applications,” Proceedings of AIAA Infotech@Aerospace, Hyatt Regency, Crystal City. Arlington, VA, September 26-29, 2005.
  20. Madni, A., Madni, C., Garcia, S. “Cognitive Model-enabled Simulation-based Training of AOC Operators,” Proceedings of AIAA Infotech@Aerospace, Hyatt Regency, Crystal City. Arlington, VA, September 26-29, 2005.
  21. Madni, A.M., Sorensen H.B., and Madni, C.C. “Outcome-driven Simulation: A Competency-based Training Approach to Achieving Decision Dominance,” Proceedings of the International Conference on Systems Engineering 2005, University of Nevada, Las Vegas, August 16 - 18, 2005.
  22. Madni, A.M. and Madni, C.C., Garcia, S.K. “Cognitive Model-enabled Simulation-based Training of Aerospace Operations Center Operators,” Proceedings of the 11th International Conference on Human-Computer Interaction, Las Vegas, NV, July 22-27, 2005.
  23. Madni, A.M. and Madni, C.C. “Context-driven Collaboration During Mobile C2 Operations,” Proceedings of The Society for Modeling and Simulation International 2004 Western Simulation Multiconference, January 18-22, 2004, San Diego, CA.
  24. Madni, A.M., Garcia, S., Lin, W. & Madni, C.C. “Improving Teamwork and Team Performance through Process Training,” International Conference on Team Resource Management in the 21st Century, October 24, 2003, Daytona Beach, FL.
  25. Madni, A.M., Madni, C.C., Salasin, J. “ProACT™: Process-aware Zero Latency System for Distributed, Collaborative Enterprises,” Proceedings of Twelfth Annual International Symposium of the International Council On Systems Engineering (INCOSE), Las Vegas, Nevada, July 28 – August 1, 2002.
  26. Madni, A.M., Lin, W., and Madni, C.C. “Human-agent Collaboration: Ontology and Framework for Designing Adaptive Human-agent Collaboration Architectures,” Proceedings of Twelfth Annual International Symposium of the International Council On Systems Engineering (INCOSE), Las Vegas, Nevada, July 28 – August 1, 2002.
  27. Madni, A.M., Madni, C.C., Plaut, J., and Zarnow, D. “Integrated Product Development Planning within Distributed Organizations Using ProcessEdge™,” Proceedings of Twelfth Annual International Symposium of the International Council On Systems Engineering (INCOSE), Las Vegas, Nevada, July 28 – August 1, 2002.
  28. Madni, A.M. “Healthtrak™: A Process-Aware Medical Digital Assistant (MDA) for Web-Based Management of Computerized Patient Records,” Proceedings of the Integrated Design and Process Technology Conference, (IDPT-2002), Pasadena, CA, June 23-28, 2002.
  29. Madni, A.M., Madni, C.C., Plaut, J., and Zarnow, D. “Integrated Product Development Planning within Distributed Organizations Using ProcessEdge™,” Proceedings of the Integrated Design and Process Technology Conference, (IDPT-2002), Pasadena, CA, June 23-28, 2002.
  30. Madni, A.M. “Real-time Symbolic Control of a C2 Enterprise,” Proceedings of the Advances in Enterprise Control Symposium, San Diego, CA, November 15-16, 1999.
  31. Madni, A.M., Lin, W. and Madni, C.C. “IDEON™: An Ontology for Modeling and Managing Distributed Enterprises,” Proceedings of the Thirteenth International Conference on Systems Engineering, Las Vegas, Nevada, August 10-12, 1999, pp. SE199-SE204.
  32. Madni, A.M. and Gayton, J.P. “A Process-Centric Crisis Action Planning and Execution System,” Proceedings of the Thirteenth International Conference on Systems Engineering, Las Vegas, Nevada, August 10-12, 1999, pp. SE205-210.
  33. Madni, A.M. and McCoy, W.L. “Bringing ANSI/EIA-632 to Life through ProcessIPPD,” Proceedings of the Thirteenth International Conference on Systems Engineering, Las Vegas, Nevada, August 10-12, 1999, pp. SE211-SE216.
  34. Madni, C.C. and Madni, A.M. “Web-enabled Collaborative Design Process Management: Application to Multichip Module Design,” (Invited paper) Proceedings of the 1998 IEEE International Conference on Systems, Man, and Cybernetics, San Diego, CA, October 11-14, 1998, pp. 2625-2630. (Sponsor: DARPA Electronics Systems Technology Office)
  35. Madni, A.M. “A Conceptual Framework and Enabling Technologies for Computer-aided Concurrent Engineering (CACE),” Plenary address & Invited Paper, Second International Conference on Human Aspects of Advanced Manufacturing and Hybrid Automation, Honolulu, Hawaii, August 12-16, 1990.
  36. Madni, A.M., Madni, C.C., and Lin, W. “IDEON™/IPPD: An Ontology for Systems Engineering Process Design and Management,” (Invited Paper) Proceedings of the 1998 IEEE International Conference on Systems, Man, and Cybernetics, San Diego, CA, October 11-14, 1998, pp. 2597-2602.
  37. Madni, A.M., Madni, C.C., and Stogdill, C. “ProcessWeb™: Web-enabled Process Support for Planning the Formation of a Virtual Enterprise,” (Invited paper) Proceedings of the 1998 IEEE International Conference on Systems, Man, and Cybernetics, San Diego, CA, October 11-14, 1998, pp. 2591-2596.
  38. Madni, A.M., Madni, C.C., and McCoy, W.L. “Process Support for IPPD-Enabled Systems Engineering,” (Invited paper) Proceedings of the 1998 IEEE International Conference on Systems, Man, and Cybernetics, San Diego, CA, October 11-14, 1998, pp. 2585-2590 vol.3.
  39. Madni, A.M. “ProcessWeb™: Web-enabled Process Support for Planning the Formation of a Virtual Enterprise,” Proceedings of 1997 Defense Manufacturing Conference, Palm Springs, CA, December, 1997.
  40. Madni, A.M. and Madni, C.C. “An Adaptive Wide-area Design Process Manager for Collaborative Multichip Module Design,” Proceedings of the 1997 IEEE Multi-Chip Module Conference, Santa Cruz, CA, February, 1997. (Sponsor: DARPA Electronics Systems Technology Office)
  41. Samant, V., French, S., Bunch, H., Madni, A., Jones, G., and Currie, R. “Development of a Simulation Model of the Agile Collaborative Shipbuilding Enterprise,” Proceedings of the Society for Naval Architects and Marine Engineers (SNAME), August, 1995.
  42. Madni, A.M. “A Process-centered Methodology for Engineering of Complex Systems,” Proceedings of the 1994 Complex Systems Engineering Synthesis and Assessment Technology Workshop (CSESAW '94), July, 1994.
  43. Madni, A.M., Freedy, A., Estrin, G.R., and Melkanoff, M. “Concurrent Engineering Workstation for Multi-Chip Module Product Development Process,” Invited Paper presented at CALS & CE Washington '91 Conference and Exposition, Washington, D.C., June, 1991.
  44. Madni, A.M. “A Conceptual Framework and Enabling Technologies for Computer-Aided Concurrent Engineering (CACE),” Invited Paper presented at Proceedings of the 2nd International Conference on Human Aspects of Advanced Manufacturing and Hybrid Automation, Honolulu, HI, 12-16 August, 1990.
  45. Madni, A.M., Balcerak, R., Estrin, G., Freedy, A., and Melkanoff, A. “Computer-aided Concurrent Engineering (CACE) of Infrared Focal Plane Arrays (IRFPAs): Emerging Directions and Future Prospects,” Invited Paper presented at the Second National Symposium on Concurrent Engineering, Morgantown, West Virginia, February, 1990.
  46. Madni, A.M. and Chu, Y. “Technology Integration for a Mobile, High-Performance Robotic Manipulator,” Proceedings of IEEE International Conference on Systems, Man, and Cybernetics, Beijing, China, Elmsford, NY: Pergamon Press, August, 1988.
  47. Madni, A.M. and Chu, Y. “A Design Support System for Crew System Automation,” Proceedings of IEEE International Conference on Systems, Man, and Cybernetics, Beijing, China, Elmsford, NY: Pergamon Press, August, 1988.
  48. Madni, A.M. “HUMANE: A Designer's Assistant for Modeling and Evaluating Function Allocation Options,” Proceedings of Ergonomics of Advanced Manufacturing and Automated Systems Conference, Louisville, KY, August 16-18, 1988, pp. 291-302.
  49. Madni, A.M., Meshkinpour, F., Giboney, V., Madni, C., McMeel, K., and Piper, A. “A Knowledge-Based Diagnosis Approach for Real-Time Training Simulators,” Proceedings of the 1988 Summer Computer Simulation Conference, Seattle, Washington, July 25-28, 1988.
  50. Madni, A.M. “HUMANE: A Knowledge-Based Simulation Environment for Human-Machine Function Allocation,” Proceedings of IEEE National Aerospace & Electronics Conference, Dayton, Ohio, May, 1988.
  51. Chu, Y. and Madni, A.M. “Knowledge-based Simulation of Tactical Adversary,” Proceedings of Second Workshop on AI and Simulation, AAAI Conference, Seattle, August 1987.
  52. Madni, A.M., Ahlers, R., and Chu, Y. “Knowledge-based Simulation: An Approach to Intelligent Opponent Modeling for Training Tactical Decisionmaking,” Proceedings of the 9th Interservice/Industry Training Systems Conference, pp. 179-183, November 30-December 2, 1987, Washington, D.C.
  53. Madni, A.M. and Chatelier, P. “Manprint Tools: Development Framework and Integration Architecture,” Proceedings of the International Conference on Military Personnel and Training, May 5 -7, 1987.
  54. Madni, A.M., Freedy, A., and Ahlers, R. “An Expert Surrogate Instructor for Acquisition of Cognitive and Motor Skills in Rifle Marksmanship,” Proceedings of the 7th Interservice/Industry Training Equipment Conferences, 1985.
  55. Madni, A.M., Brenner, M.A., Costea, I., MacGregor, D., Meshkinpour, F. “Option Generation: Problems, Principles, and Computer-Based Aiding,” Proceedings of 1985 IEEE International Conference on Systems, Man, and Cybernetics, Tucson, Arizona, November, 1985, pp 757-760.
  56. Brenner, M.A., Madni, A.M., Schwalm, N., and Otsubo, S. “An Intelligent Microcomputer-Based Personal Medical Advisor,” Proceedings of 1985 IEEE International Conference on Systems, Man, and Cybernetics, Tucson, Arizona, November, 1985, pp. 751-753.
  57. Madni, A.M., and Moses, F. “An Intelligent Soldier-Vehicle Interface for Future Close Combat Vehicles,” Proceedings of 1985 IEEE International Conference on Systems, Man, and Cybernetics, Tucson, Arizona, November, 1985, pp. 754-756.
  58. Chu, Y., and Madni, A.M. “Network-Based Human Behavior Modeling for Adaptive Training” Proceedings of 1985 IEEE International Conference on Systems, Man, and Cybernetics, Tucson, Arizona, November, 1985, pp.511-513.
  59. Madni, A.M., and Chu. Y. “Network Model-Guided Expert Knowledge Acquisition,” Proceedings of 1985 IEEE International Conference on Systems, Man, and Cybernetics, Tucson, Arizona, November, 1985, pp. 10-13.
  60. Brenner, M.A, Madni, A.M., and Schwalm, N. “A Decision Aid for Air Force Resource Apportionment,” Proceedings of 1985 IEEE International Conference on Systems, Man, and Cybernetics, Tucson, Arizona, November, 1985, pp. 761-762.
  61. Andriole, S.J., Thompson, J.R., and Madni, A.M. “Alternative Defensive Plan Generation & Evaluation,” Proceedings of 1985 IEEE International Conference on Systems, Man, and Cybernetics, Tucson, Arizona, November, 1985, pp. 1017-1024.
  62. Madni, A.M. and Freedy, A. “Intelligent Interfaces for Human Control of Advanced Automation and Smart Systems,” Proceedings of 1983 IEEE International Conference on Systems, Man, and Cybernetics, Bombay and New Delhi, India, December 30, 1983 - January 7, 1984, pp. 807-810.
  63. Madni, A.M. “Integrated Modeling Approaches in Advanced Cockpit Automation,” Proceedings of the 1983 SAE Aerospace Congress & Exposition, Long Beach Convention Center, Long Beach, CA, October 1983.
  64. Madni, A.M. and Lyman, J. “Model-Based Estimation and Prediction of Task-Imposed Mental Workload,” Proceedings of 1983 IEEE International Conference on Systems, Man, and Cybernetics Symposium, Norfolk, VA, October 1983.
  65. Madni, A.M. and Chu, Y. “Intelligent Display Interface for Situation Monitoring, Management, and Maintenance (M3),” Proceedings of 1983 IEEE International Conference on Systems, Man, and Cybernetics Symposium, Norfolk, VA, October, 1983. (also in the Proceedings of the Human Factors Society 27th Annual Meeting, October, 1983)
  66. Madni, A.M., Chu, Y., and Freedy, A. “Intelligent Interface for Remote Supervision and Control of Underwater Manipulation,” Proceedings of the Oceans '83 Conference & Exposition, Sunnyvale, CA, August, 1983.
  67. Madni, A.M., Chu, Y., and Freedy, A. “Intelligent Interface for Remote Supervision and Control of Underwater Manipulation,” Proceedings of the MTS-IEEE, Ocean 83 Conference & Exposition, San Francisco, CA, August, 1983.
  68. Madni, A., Freedy, A., and Chu, Y. “Intelligent Interfaces in Automation/Robotics,” Proceedings of the International Robot Conference & Exhibition, Long Beach, CA, June, 1983.
  69. Madni, A.M., Lyman, J., Freedy, A., and Chu, Y. “The Role of Intelligent Interfaces in Robotics,” Proceedings of the 1983 Conference on Artificial Intelligence, at Oakland University, Rochester, MI, April, 1983.
  70. Fielding, M.R., Madni, A.M., and Chu, Y. “Airborne Remotely Operated Devices (ARODs): Intelligent Mobile Platforms for Reconnaissance and Surveillance Operations,” Proceedings of the III Israel Symposium on Man-Machine Systems (Sponsored by IEEE Israel Section), June, 1982.
  71. Madni, A.M. and Freedy, A. “Decision Aids for Airborne Intercept Operations in Advanced Aircrafts,” Proceedings of the International Conference on Cybernetics and Society, Sponsored by IEEE Systems, Man, and Cybernetics Society, October 26-28, 1981, pp. 224-234.
  72. Madni, A.M. and Freedy, A. “Decision Aids for Airborne Intercept Operations in Advanced Aircrafts,” Proceedings of the Seventh Annual Conference on Manual Control, JPL Publication 81-95, October 15, 1981, pp. 187-210.
  73. Madni, A.M., Freedy, A., and Lyman, J. “Input Signal Compliant Method for Myoelectric Control of Prosthetic and Medical Robotic Arms,” Published in Advanced of External Control of Human Extremities, Proceedings of the Seventh International Symposium on External Control of Human Extremities, Dubrovnik, September 7-12, 1981, Yugoslav Committee for Electronics and Automation, Belgrade, 1981.
  74. Madni, A.M., Freedy, A., and Wickens, J. “Testbed Simulation of Adaptive Information Selector for Marine Corps' Tactical Combat Operations System,” Proceedings: Symposium on Human Engineering in Computer Decision and Communication Systems, (Sponsored by IEEE Israel Section), October, 1978.
  75. Madni, A.M. and Nilsen, R.N. “On the Solution of Implicit Ordinary Differential Equations,” Proceedings of Summer Joint Computer Conference, pp. 140-144, Summer, 1973.



Presentations and Invited Presentations (Keynotes, Plenary Talks, Invited Presentations, Seminars)

  1. Madni, A.M. “GameSim™: Behavioral Game-Theoretic Framework for Socio-Cultural Training,” Proceedings of the Human Social Culture Behavior (HSCB) Focus 2010 Conference, Chantilly, VA, August 5-7, 2009.
  2. Madni, A.M. and Madni, C.C. “Rapid Scenario Building and Optimization for Simulation-based Exercises,” Proceedings of the 2009 IEEE International Conference on Technologies for Homeland Security, Waltham, MA, May 11-13, 2009.
  3. Madni, A.M. “Integrating Human Factors, Software and Systems Engineering: Challenges and Opportunities (Invited Presentation),” Proceedings of the 23rd International Forum on COCOMO and Systems/Software Cost Modeling and ICM Workshop 3, Los Angeles, CA, October 27-30, 2008.
  4. Madni, A.M. “Research in Serious Games for Teaching Complex Technical Skills: A Systems Approach (Invited Presentation),” Epstein Dept. of Industrial and Systems Engineering, Viterbi School of Engineering, University of Southern California, Los Angeles, CA, May 21-22, 2008.
  5. Madni, A.M. “AgileTecting™: A Principled Approach to Agile Systems Architecting and Engineering,” 2008 Systems Engineering Symposium “System Engineering Agility,” Northrop Grumman Corporation, May 13, 2008.
  6. Madni, A.M. “How to Engineer a System of Systems with Emergent Behavior,” Proceedings of the 18th Annual International Symposium of the International Council On Systems Engineering (INCOSE), Plenary Panelist, The Netherlands, June 15-19, 2008.
  7. Madni, A.M. “AgileTecting™: Placing Agility Where It Counts In System and Software Architecting (Invited Presentation),” USC-CSSE Executive Workshop on Integrating Systems and Software Engineering, Davison Conference Center, Los Angeles, CA, October 29-30, 2007.
  8. Madni, A.M. “Are New Principles Required to Treat Enterprises as Systems?” Proceedings of 17th Annual International Symposium of the International Council On Systems Engineering (INCOSE), Plenary Panelist, San Diego, CA, June 27, 2007.
  9. Madni, A.M., Madni, C.C., and Sorensen, B.H. “Simulation-Based Context-Sensitive Learning of Leadership Skills,” Proceedings of the Integrated Design and Process Technology Conference, (IDPT-2007), Antalya, Turkey, June 3-8, 2007.
  10. Madni, A.M. “Architecture Tradeoff Analysis: A Disciplined Approach to Balancing Quality Requirements,” Ground System Architectures Workshop (GSAW), Architecture-Centric Evolution (ACE) of Software-Intensive Systems Presentation, March 27, 2007.
  11. Madni, A.M. “Architecture Tradeoff Analysis: Towards a Disciplined Approach to Balancing Quality Requirements,” USC-CSSE Executive Workshop, Annual Research Review Presentation, February 14, 2007.
  12. Madni, A.M. “Frontiers of Research in Intelligent Systems,” Plenary Talk, Conference on Systems Engineering Research (CSER), 2006.
  13. Madni, A.M. “System-of-Systems Architecting: Critical Success Factors,” USC-CSSE Convocation, Executive Workshop Presentation, October 23-26, 2006.
  14. Madni, A.M. “A Framework for Stakeholder-responsive Agile Simulations (SAS),” USC-CSE Executive Workshop, March 15, 2006.
  15. Madni, A.M. Invited lectures in Israel to IAI, Tadiran, and Israeli Air Force in Advanced Artificial Intelligence Techniques in Cockpit Automation (e.g., Pilot’s Associate).
  16. Madni, A.M. “Intelligent Process Management,” ARPI Workshop, San Francisco, California, November 4-6, 1997.
  17. Madni, A.M. “ProcessWeb™: Process-enabled Planning and Formation of a Virtual Enterprise,” Agile Manufacturing Principal Investigators Meeting, Institute for Defense Analyses, Washington, D.C., September 23-24, 1997.
  18. Madni, A.M. “Modeling and Simulation Toolkit for Virtual Prototyping of SC-21 Ship Information System,” Naval Surface Warfare Center, Dahlgren, Virginia, June 13, 1997.
  19. Madni, A.M. “Wide-Area Workflow Management: Challenges and Proposed Solutions,” Annual ARPI Program Review/Meeting/Workshop, Lynnfield, Massachusetts, June 9-12, 1997.
  20. Madni, A.M. “ProcessEdge™: Web-enabled Wide-area Design Process Manager for Microelectronics,” NRaD, Point Loma San Diego, California, May 27, 1997.
  21. Madni, A.M. “Process Support for IPPD-enabled Systems Engineering,” Naval Surface Warfare Center, Dahlgren, VA, April 23, 1997.
  22. Madni, A.M. Plenary Talk at 2nd International Conference on Human Aspects of Advanced Manufacturing and Hybrid Automation, Honolulu, Hawaii, August 12-16, 1990.
  23. Madni, A.M. and Freedy, A. “Assessment of Enabling Technologies for Computer-Aided Concurrent Engineering (CACE),” Invited Presentation, Conference on Technology Assessment: Estimating the Future, UCLA Center for Technology Assessment, Sept., 1990.
  24. Madni, A.M. “The Role of Perceptronics in Enterprise Modeling and Design,” UCLA Computer Science Department, School of Engineering and Applied Science 1989 Research Review.
  25. Madni, A.M. and Moses, F.L. “Expert Systems Interfaces in Military Applications,” 30th Annual Meeting of the Human Factors Society, September 29-October 3, 1986, Dayton, OH.
  26. Madni, A.M. “Artificial Intelligence in Decision Support Systems, Decision Support Workshop,” sponsored by Office of Naval Research and Office of Naval Technology, at MITRE Corporation, May 20-21, 1986.
  27. Madni, A.M. “Expert Systems in Decision Support Systems,” Forum for Artificial Intelligence in Management (FAIM, '86), sponsored by Defense Systems Management College, Ft. Belvoir; Richmond, VA, May 18-21, 1986.
  28. Madni, A.M. “Research Plan for Uses of Knowledge-Based Technology in Tri-Service Training for Oakridge Universities,” under Naval Training Systems Center sponsorship, May 1986.
  29. Madni, A.M. “Integrated Modeling Approaches for Decision Aiding Systems,” Presented at Third Annual Workshop on Command Decision Aiding Technology for Military C2, John Hopkins University, Nov. 5-7, 1985.
  30. Madni, A.M. “Uses of Artificial Intelligence Technology for MANPRINT Program,” Human Engineering Laboratory, 1985.
  31. Madni, A.M. “Option Generation: Problems, Principles and Computer-Based Aiding,” Decision Augmentation Working Group, Naval Personnel Research and Development Center, San Diego, 1984.
  32. Madni, A.M. “F-14 Tactical Decision Aid,” Military Operations Research Society Conference 4, 1981.
  33. Madni, A.M., and Chadwick, M.C. “Shuttle Orbiter Navigation System,” Invited symposium paper presented at the Institute of Navigation Thirty-Third Annual Meeting, June 1977.


Research Reports

  1. Madni, A.M. and Madni, C.C. “MedGames™: Micro Games for Proactive Preventive Medicine,” Intelligent Systems Technology, Inc. Phase I Final Report, ISTI-FR-608-8/09, Contract # FA8650-09-M-6933, August 6, 2009.
  2. Madni, A.M. and Madni, C.C. “ActionBuilder™: Automated Scenario/Script Builder for Simulation-based Training Systems,” Intelligent Systems Technology, Inc. Phase II Yearly Technical Report, ISTI-YTR-603-5/09, Contract #NBCHC080070, May 18, 2009.
  3. Madni, A.M. and Moini, A., and Madni, C.C. “ContentVault™: Methodology and Tools for Securing Training Objects and Records,” Intelligent Systems Technology, Inc. Phase II Final Report, ISTI-FR-602-1/09, Contract #N61339-07-C-0026, January 16, 2009.
  4. Madni, A.M., Madni, C.C., MacGregor, D., Riedl, M., and Rouse, W.B. “GameSim™: Game-based Simulation for Human, Social, and Cultural Training,” Intelligent Systems Technology, Inc. Phase I Final Report, ISTI-FR-601-12/08, Contract # N00014-08-M-0337, December 12, 2008.
  5. Madni, A.M., Madni, C.C., and MacGregor, D. “RAIDER™: Rapid and Accurate Idea Exchange and Retention,” Intelligent Systems Technology, Inc. Phase I Final Technical Report, ISTI-FTR-600-09/08, Contract # W31P4Q-08-C-0190, September 2, 2008.
  6. Madni, A.M., Madni, C.C. and Cruz Jr., J.B. “Game2Win™: Game-based Optimization of BMDS Assets,” Intelligent Systems Technology, Inc. Phase I Final Report, ISTI-FR-599-08/08, Contract # HQ0006-08-C-7837, August 12, 2008.
  7. Madni, A.M., Moini, A. and Madni, C.C. “IO-Train™: Information Operations Training Using Modeling and Simulation,” Intelligent Systems Technology, Inc. Phase I Final Report, ISTI-FR-598-05/08, Contract # N00039-08-C-0006, May 5, 2008.
  8. Madni, A.M., and Madni, C.C. “GATS™: A Generalizable Aiding-Training System for Human Performance and Productivity Enhancement,” Intelligent Systems Technology, Inc. Phase I Final Report, ISTI-FR-594-01/08, Contract # FA8650-07-M-6790, January 3, 2008.
  9. Madni, A.M., and Moini, A. “DataSentry™: A Cross-Platform Digital Rights Management Technology,” Intelligent Systems Technology, Inc. Phase I Final Report, ISTI-FR-596-12/07, Contract #W15P7T-07-C-P439, December 7, 2007.
  10. Madni, A.M., and Moini, A. “AgileTecture™: A Methodology and Toolkit for Agile Design and Dynamic Reconfiguration of C4ISR Architectures,” Intelligent Systems Technology, Inc. Phase II Final Report, ISTI-FR-583-12/07, Contract #W15P7T-05-C-S601, December 14, 2007.
  11. Madni, A.M., and Moini, A. “DecisionEdge™: Achieving Decision Dominance Information Operations,” Intelligent Systems Technology, Inc. Phase II Final Report, ISTI-FR-580-10/07, Contract #FA8650-05-C-6540, October 2, 2007.
  12. Madni, A.M., and Madni, C.C. “ActionBuilder™: Automated Scenario/Script Builder for Simulation-Based Training Systems,” Intelligent Systems Technology, Inc. Phase I Final Report, ISTI-FR-591-10/07, Contract #NCCHC070072, October 1, 2007.
  13. Madni, A.M., Madni, C.C., and Zarnow, D. “Cost360™: Enterprise-wide Cost Modeling Tracking and Sensitivity Analyses,” Intelligent Systems Technology, Inc. Phase I Final Report, ISTI-FR-593-09/07, Contract #HQ0006-07-C-7736, September 28, 2007.
  14. Madni, A.M., and Moini, A. “GridSpaces™: Dynamic Spaces for Runtime Composition of Grid Services,” Intelligent Systems Technology, Inc. Phase I Final Report, ISTI-FR-592-09/07, Contract #HQ0006-07-C-7735, September 26, 2007.
  15. Madni, A.M., Madni, C.C., Moini, A., and Sawyer, E. “ActionVisuals™: Ontology-enabled, Agile Visualization of Multi-domain System-of-Systems Data,” Intelligent Systems Technology, Inc. Phase I Final Report, ISTI-FR-586-09/06, Contract #HQ0006-06-C-7433, September 30, 2006.
  16. Madni, A.M., Moini, A., and Madni, C.C. “Cognitecture™: Cognition-Based Interactive Architecture for Next Generation Intelligent Agents,” Intelligent Systems Technology, Inc. Phase II Final Technical Report, ISTI-FTR-567-8/06, Contract #W31P4Q-04-C-R222, August 10, 2006.
  17. Madni, A.M., Moini, A., and Madni, C.C. “ContentVault ™: Methodology and Tools for Securing Training Objects and Records,” Intelligent Systems Technology, Inc. Phase I Final Technical Report, ISTI-FR-584-05/06, Contract #N61339-06-C-0022, May 1, 2006.
  18. Madni, A.M and Madni, C.C. “Dynamic Context Manager for Network-Centric Warfare Operations, Intelligent Systems Technology,” Inc. Phase II Final Technical Report, ISTI-FTR-572-2/06, Contract #W31P4Q-04-C-R047, February 20, 2006.
  19. Madni, A.M and Madni, C.C. “FastFind™: A Meaning-based Context-sensitive Search Engine for Electronic Performance Support Knowledge Portal,” Intelligent Systems Technology, Inc. Phase II Final Technical Report, ISTI ISTI-FTR-571-12/05, Contract #W15P7T-04-C-P412, December 20, 2005.
  20. Madni, A.M., Moini, A., Madni, C.C. “SoftTrace™: A Toolkit for Documenting, Analyzing, and Maintaining Software Pedigree,” Intelligent Systems Technology, Inc., Phase I Final Technical Report, ISTI-FTR- 578-09/05, Contract #FA8650-05-M-8043, September 14, 2005.
  21. Madni, A.M and Madni, C.C. “FasTrain™: A web-based Training Framework for Accelerated E-learning and Aptitude Evaluation,” Intelligent Systems Technology, Inc. Phase II Final Technical Report, ISTI ISTI-FR-561-07/29, Contract #F34601-03-C-0454, July 29, 2005.
  22. Madni, A.M., Moini, A. and Madni, C.C. “AgileTecture™: A Methodology and Toolkit for Agile Design and Dynamic Reconfiguration of C4ISR Architectures,” Intelligent Systems Technology, Inc. Phase I Final Technical Report, ISTI-FR-576-07/05, Contract #W15P7T-05-C-S601, July 8, 2005.
  23. Madni, A.M., Madni, C.C. and Shieh, M. “ProcessTrain™: Cognitive Model-driven Distributed Interactive Training for the C2 Aerospace Operations Center (AOC),” Intelligent Systems Technology, Inc. Phase II Final Technical Report, ISTI-FTR-564-4/05, Contract #F33615-03-C-6320, June 2, 2005.
  24. Madni, A.M. and Madni, C.C. “STORIES™: Scenario-based Training Observation and Remediation of Inexperienced Soldiers,” Intelligent Systems Technology, Inc. Phase I Final Technical Report, ISTI-FR-577-05/05, Contract #N61339-05-C-0028, May 10, 2005.
  25. Madni, A.M., and Madni, C.C. “DecisionEdge™: Achieving Decision Dominance In Information Operations,” Intelligent Systems Technology, Inc. Phase I Final Report, ISTI-FR-574-03/02, Contract #FA8650-04-M-6495, March 2, 2005.
  26. Madni, A.M., Madni, C.C. and Jo, W.S. “MainTrain™: Maintenance Skills Training Through Distributed Learning Principles,” Intelligent Systems Technology, Inc. Phase II Final Technical Report, ISTI-FR-562-12/04, Contract #N00014-02-C-0512, December 23, 2004.
  27. Madni, A.M., Madni, C.C., Malgeri M. “CRUISER™: Cross-domain User Identity and Credential Management Service,” Intelligent Systems Technology, Inc. Phase I Final Technical Report, ISTI-FTR-568-3/04, Contract #F30602-03-C-0172, March 17, 2004.
  28. Madni, A.M. and Madni, C.C. “Cognitecture™: Cognition-Based, Integrative Architecture for Next Generation Intelligent Agents,” Intelligent Systems Technology, Inc. Phase I Final Technical Report, ISTI-FTR-567-02/04, Contract #DAAH01-03-C-R266, February 27, 2004.
  29. Madni, A.M., Madni, C.C., Malgeri M. “Knowport™: Knowledge-Access Portal for Brigade Combat Team and Other Knowledge Warriors,” Intelligent Systems Technology, Inc. Phase II Final Report, ISTI-FR-555-1/03, Contract #DAAB07-02-C-L402, January 15, 2004.
  30. Madni, A.M., Madni, C.C., Malgeri, M., & Hensley, D. “Application Sentinel™: Tool Suite for Software Protection During Development,” Intelligent Systems Technology, Inc. Final Technical Report, ISTI-FTR-569-01/04, Contract # F33615-03-M-1496, January, 2004.
  31. Madni, A.M., Madni, C.C., & Malgeri, M. “ALSSYS™: Multimedia-enabled Advanced Logistics Support System for Shipboard Use,” Intelligent Systems Technology, Inc. Final Technical Report, ISTI-FTR-567-12/03, Contract # N00024-03-C-4109, December 16, 2004.
  32. Madni, A.M., Madni, C.C., & Lin, W. “Case-Based Planning and Adaptive Construction of Software, Intelligent Systems Technology,” Inc. Phase II Final Technical Report, ISTI-FTR-550-08/15, Contract # DAAH01-01-C-R140, August 15, 2003.
  33. Madni, A.M. & Madni, C.C. “FastFind™: A Meaning-based Context-sensitive Search Engine for Electronic Performance Support Knowledge Portal, Intelligent Systems Technology, Inc. Phase I Final Report, ISTI-FTR-563-07/23, Contract # DAAB32-03-C-0010, July 23, 2003.
  34. Madni, A.M., Lin, W., Madni, C.C., Malgeri, M., & Jo, W.S. “FasTrain™: A Web-based Training Framework for Accelerated E-learning and Aptitude Evaluation,” Intelligent Systems Technology, Inc. Phase I Final Report, ISTI-FR-561-03/18, Contract #F34601-02-C-0304, March 18, 2003.
  35. Madni, A.M., Madni, C.C., Lin, W., Malgeri, M. “ProcessTrain™: Cognitive Model-driven Distributed Interactive Training for the C2 Aerospace Operations Center (AOC),” Intelligent Systems Technology, Inc. Phase I Final Technical Report, ISTI-FTR-559-2/03, Contract #F33615-02-M-6045, February 13, 2003.
  36. Madni, A.M., Madni, C.C., Malgeri M. “Knowport™: Knowledge-Access Portal for Brigade Combat Team and Other Knowledge Warriors,” Phase II Scientific and Technical Report, ISTI-STR-555-1/03, January 17, 2003.
  37. Madni, A.M. and Madni, C.C. “Intelligent Process and Information Management (IPIM): The Key to Managing Change with Zero Latency,” Intelligent Systems Technology, Inc. Phase I Final Technical Report, ISTI-FTR-530-7/02-1, Contract #DAAH01-00-C-R182, July 31, 2002.
  38. Madni, A.M. Weinwen, L., and Madni, C.C. “INSTRANETTE™: Intelligent Assistant for Web-based Training Vignette Design, Intelligent Systems Technology,” Inc. Phase I Final Technical Report, ISTI-DFTR-557-6/02, Contract #N61339-02-C-0042, July 29, 2002.
  39. Madni, A.M., Lin, W., and Madni, C.C. “HealthTrak™: Technology Enhanced Human Interface to the Computerized Patient Record,” Intelligent Systems Technology, Inc. Phase I Final Technical Report, Contract # DAMD17-02-C-0032, July 2002.
  40. Madni, A.M., Weiwen, L., and Madni C.C. “VPEdge™: A Modeling and Simulation Toolkit for Virtual Prototyping Combat Information Systems,” Intelligent Systems Technology, Inc. Phase II Final Technical Report, ISTI-FTR-534-6/02, Contract #N00178-00-C-3006, June 17, 2002.
  41. Madni, A.M., Lin, W., and Madni, C. “Adaptive Learning in Web-based Instructional Systems,” Intelligent Systems Technology, Inc. Phase II Final Technical Report, ISTI-FTR-3/02-1, Contract #DKNB-0-90115, March, 2002.
  42. Madni A.M. and Lin, W. “A Cognitive Framework for Investigating the Shared Role of Human and Software Agents in Military C2 Decision-making,” Intelligent Systems Technology, Inc. Final Report, ISTI-FTR-552-1/02, Contract # N00014-01-C-0211, January, 2002.
  43. Madni A.M., Lin, W., and Madni, C. “MainTrain™: Maintenance Skills Training Through Distributed Learning Principles,” Intelligent Systems Technology, Inc. Final Report, (Phase I) ISTI-FR-553-12/01, Contract # N00024-01-C-4081, December, 2001.
  44. Madni, A.M., “A Cognitive Framework for Investigating the Shared Role of Human and Software Agents in C2 Decision-making,” Intelligent Systems Technology, Inc. Technical Report, ISTI-TPR-7/01-1, July 27, 2001.
  45. Madni A.M., Valente, A., and Madni, C. “Knowport™: Knowledge Access Portal for Brigade Combat Team and other Knowledge Warriors,” Intelligent Systems Technology, Inc. Final Report, (Phase I) ISTI-FR-549-7/01, Contract # DAAB07-01-C-L510, July 2001.
  46. Madni, A.M., Madni, C. “Process Support for IPPD-enabled Engineering of Complex Systems,” Intelligent Systems Technology, Inc. Final Technical Report, ISTI-FTR 528-3/01, Contract #DAAH01-98-C-R141, March, 2001.
  47. Madni, A.M. “An Ontology-based Approach to Integrating Planning Systems within an Intelligent Process Management Framework,” Intelligent Systems Technology, Inc. Technical Report ISTI-TR-541-2001, Contract # N00173-00-C-2055, February 15, 2001.
  48. Madni A.M. and Madni, C. “NGI-enabled Collaborative Planning and Management of Organizational Initiatives,” Intelligent Systems Technology, Inc. Final Technical Report, ISTI-FTR-542-11/00, January, 2001.
  49. Madni A.M., Lin, W., Madni, C. “DesignEdge: An Intelligent Adaptive Software Construction Tool Suite,” Intelligent Systems Technology, Inc. Phase I Final Technical Report, ISTI-FTR-538-11/00, November, 2000.
  50. Madni, A.M., Lin, W., Naiem, B., Johnson, L., Ganeshan, R., and Rickel, J. “Intelligent Agents for Education and Training Applications,” Intelligent Systems Technology, Inc. Phase II Final Report, ISTI-FTR-526-3/00, March, 2000.
  51. Madni, A.M., Lin, W., Naiem, B., and Madni, C. “Adaptive Learning in Web-based Instructional Systems,” Intelligent Systems Technology, Inc. Phase I Final Technical Report, ISTI-FTR-1/00-2, January, 2000.
  52. Madni, A.M., Lin, W., Naiem, B., and Madni, C. “Integration of Manufacturing Applications through Next Generation Process Exchange Technology,” Intelligent Systems Technology, Inc. Final Technical Report, ISTI-FTR-1/00-3, January, 2000.
  53. Madni, A.M., Lin, W., Naiem, B., and Madni, C. “Intelligent Process and Information Management (IPIM): The Key to Managing Change with Zero Latency,” Intelligent Systems Technology, Inc. Phase I Final Technical Report, ISTI-FTR530-12/99-1, Contract #DAAH01-00-R-R182, December 28, 1999.
  54. Serrano, E., Madni, A.M., and Naiem, B. “Forecast/ABC: A Predictive Activity-based Cost Modeling and Analysis Agent Network,” Intelligent Systems Technology, Inc. Final Technical Report, ISTI-FTR-527-1/99, January, 1999.
  55. Madni, A.M., Mi, P., Madni, C., Naiem, B., Johnson, L., and Rickel, J. “Intelligent Agents for Education and Training Applications,” AFRL-HE-BR-TR-1998-0101, December, 1998.
  56. Madni, A.M., Lin, W., and Madni, C.C. “I-WFM for C4I Process Management,” Intelligent Systems Technology, Inc. Annual Scientific and Technical Report, Contract #F30602-97-C-0293, ISTI-ATR-524-01, July, 1998. (Sponsor: DARPA Information Sciences Office)
  57. Madni, A.M. and Madni, C.C., and Naiem, B. “ProcessWeb™: Process-enabled Planning and Composition of an Agile Virtual Corporation,” Intelligent Systems Technology, Inc. Final Technical Report, ISTI-ITR519-01, April, 1998. (Sponsor: DARPA Defense Sciences Office)
  58. Madni, A.M., Madni, C., Naiem, B., & Serrano, E. “A Scaleable, Customizable MCM Design Process Manager,” Intelligent Systems Technology, Inc. Final Technical Report, ISTI-ITR520-004, January, 1998.
  59. Madni, A.M., Mi, P. Madni, C., Naiem, B., Johnson L., Rickel, J. “Intelligent Agents for Training and Education,” Intelligent Systems Technology, Inc. Final Technical Report, ISTI-IA-1/98-4, January, 1998.
  60. Madni, A.M. “Modeling and Simulation Toolkit for Virtual Prototyping of SC-21 Ship Information System Architecture,” Intelligent Systems Technology, Inc. Final Technical Report, ISTI-523-11/97-F, November, 1997.
  61. Madni, A.M. and Mi, P. “Operational Concept Document: Intelligent Workflow Management for Dynamic Environments,” Intelligent Systems Technology, Inc. ISTI-OCD-9/97, Contract #F30602-97-C-0293, October 6, 1997.
  62. Madni, A.M. and Madni, C.C. “Comparison of Process Modeling Technologies: Implications for Engineering of Complex Systems,” Intelligent Systems Technology, Inc. Technical Report, ISTI-FTR518-01, October, 1995.
  63. Madni, A.M. “Problem Representation for Effective Design Process Management: Implications for RASSP Program,” Intelligent Systems Technology, Inc. Technical Report, ISTI-FTR514-01, July, 1995.
  64. Madni, A.M. and Madni, C.C. “Simulation-based Analysis and Design of Agile Manufacturing Systems,” DOE STTR Phase I Final Technical Report, Intelligent Systems Technology, Inc. Final Technical Report, ISTI-FTR509-01, July, 1995.
  65. Madni, A.M. and Madni, C.C. “A Scalable, Customizable MCM Design Process Manager,” Scientific and Technical Report; DARPA SBIR, Intelligent Systems Technology, Inc. Phase I Final Technical Report, ISTI-FTR508-01, March, 1995.
  66. Madni, A.M. “Computer-Aided Concurrent Engineering for DARPA Initiative in Concurrent Engineering (DICE): Methodology and Tools,” (Phases 4 and 5), Perceptronics Final Technical Report; PFTR-4074-93-11/24, November, 1993.
  67. Boehm, B., Bose, P., Horowitz, E., Scacchi, W., Bendifallah, S., and Madni, A. “Next Generation Software Processes and their Environment Support,” USC Center for Software Engineering Technical Report, May, 1993.
  68. Bendifallah, S. and Madni, A.M. “Infrared Focal Plane Design with On-Focal Plane Signal Processing for Multiple System Applications,” Perceptronics Final Technical Report PFTR-4153-92-11/9, November, 1992.
  69. Madni, A.M. “In-Situ Sensing and Control of High Temperature Manufacturing Process: Multi-Sensing Neuro-Control of Metal-Organic Chemical Vapor Deposition (MOCVD) Process,” Phase I SBIR Perceptronics Final Technical Report; PFTR-4123-2/92, February, 1992.
  70. Madni, A.M. “Concurrent Engineering Process Model and Tools for Infrared Focal Plane Array (IRFPA) and Semiconductor Product Development,” Perceptronics Final Technical Report PFTR-4074-01-12/24, December, 1991.
  71. Madni, A.M., Meshkinpour, F., Conaway Madni, C. “Computer-Aided Software Engineering (CASE) for Total-Integration Avionics (TIA) Systems,” SBIR Phase I Final Report, WRDC/AAAF-3, Wright Patterson Air Force Base, OH, IST-FTR-502-01, December, 1990.
  72. Chu, Y. and Madni, A.M. “Attack Planning Neuro-Expert Systems: Design Description,” Perceptronics Final Technical Report PFTR-1315 (1)-3-89, for Northrop Corp., March, 1989.
  73. Chu, Y., Conaway, C., Harris, V., Purcell, D. and Madni, A.M. “Cockpit Automation Technology (CAT),” Perceptronics Technical Report PTR-1255-12/87, for AMRL, WPAFB, OH, December, 1987.
  74. Madni, A.M. “Authoring Aids Review: Knowledge Acquisition/Intelligent Authoring Aids System Concept Document,” Contract #N61339-86-C-0007, CDRL A003, December 8, 1986.
  75. Chu, Y. and Madni, A.M. “Analysis and Design for Maintainability Using Modified Petri Nets: Shipboard Propulsion Systems Applications,” Perceptronics Final Technical Report PFTR-1125-11-86, for ONR, Arlington, VA, November, 1986.
  76. Chu, Y., Madni, A.M., Conaway, C., Fielding, M., and Naiem, B. “Superarm: A Mobile, High-Performance Robotic Manipulator,” Perceptronics Final Report, PFR-1137(58)-64-4, April, 1986.
  77. Chu, Y. and Madni, A.M. “Interactive Task Analysis (ITA) Methodology for Cockpit Automation Technology (CAT),” Perceptronics Technical Report PTR-1217-85-12, for Northrop Corp., December, 1985.
  78. Madni, A.M., Conaway, C., Otsubo, S., and Chu, Y. “Operator Alertness/Workload Assessment Using Stochastic Model-Based Analysis of Myoelectric Signals,” Perceptronics Final Technical Report PFTR-1126-85-11, November, 1985.
  79. Madni, A.M., Margalit, G., and Chu, Y. “Pilot's Associate Definition Study: Structured Piloting Task Analyses for AI/Expert Systems Applicability,” Perceptronics Final Technical Report PFTR-1176-85-6, May, 1985. (Sponsor: DARPA Strategic Technologies Office)
  80. Madni, A.M., Chu, Y., Purcell, D., and Brenner, M. “Design for Maintainability with Modified Petri Nets (MPNs): Shipboard Propulsion System Application,” Perceptronics Technical Report PTR-1125-811-11, for ONR, Arlington, VA, November, 1984.
  81. Madni, A.M., Chu, Y., and Levine, S. “Vehicle Integrated Intelligence Soldier-Machine Interface Demonstrator,” Initial Scenario and Functional Specification, Perceptronics Functional Specification Document PFS-1171-84-9, for ARI, Alexandria, VA, September, 1984.
  82. Madni, A.M. “Artificial Intelligence Approaches in Intelligent Helicopter Automation for Nap-of-the-Earth Missions,” Perceptronics Final Technical Report PFTR-1136-84-3(b), March 1984. (Sponsor: Nasa-Ames)
  83. Madni, A.M., Chu, Y., Purcell, D., and Brenner, M.A. “Design for Maintainability with Modified Petri Nets (MPNs): Shipboard Propulsion System Application,” Office of Naval Research (ONR), Arlington, VA. Technical Report PTR-1125-83-9, September, 1983.
  84. Madni, A.M., Chu, Y., and Landee, B. “Airborne Remotely-Operated Devices Requirements Analysis for Platform and Sensor System Selection,” Perceptronics Final Technical Report PFTR-1080-82-4, for NOSC, San Diego, CA, April, 1982.
  85. Madni, A.M. and Weltman, G. “Mailphone: A Demonstration of Man-Machine Relations in Electronic Mail Networking,” Perceptronics Final Technical Report PFTR-1094-81-6, Contract No. N00014-80-C-0755, June, 1981.
  86. Madni, A.M., Christen, F., and Freedy, A. “Approaches to Study Human Factors Parameters in C3 Systems: Application to Situation Analysis,” Prepared for Vector Research, Inc., Perceptronics, Inc., Report-PRPCD-1978(01)-81-5, May, 1981.
  87. Madni, A.M., Christen, F., and Freedy, A. “Definition and Documentation of Human Factors Parameters in C3 Systems,” Prepared for Vector Research, Inc., Perceptronics Report PDHFP-1097(01)-81-1, February 5, 1981.
  88. Smoot, J., Weltman, G., and Madni, A.M. “Automated Tactical Computer Mapping Systems,” Perceptronics Final Technical Report PFTR-1033-80-1, Contract #MDA903-76-C- 0241, January, 1981.
  89. Thomas, J., Madni, A.M., and Weltman, G. “System Requirements Analysis and Prototype Design of a Low Cost Portable Simulator for Performance Training,” Annual Technical Report, PATR-1085-80-2, Contract #MDA903-79-C-0492, February, 1980.
  90. Madni, A.M., Steeb, R., and Freedy, A. “A Computer-Based Tactical Decision Aid for the F-14 AWG-9 Weapon System,” Final Technical Report, P-79-102-1079, Contract #N62269-79-M-8627, May 15, 1979.
  91. Shaket, E., Ben-Bassat, M., Madni, A.M., and Leal, A. “Applications of Adaptive Programming Technology (APT) to Command Group Training and Performance Improvement,” U.S. Army Research Institute for the Behavioral and Social Sciences (Alexandria, VA), Technical Report, TR-79-A22, May, 1979.
  92. Madni, A.M. “Navigation Verification by Analysis Methodology Using Maximum Likelihood Error Sampling Technique,” Rockwell International, Technical Report, D/383-350-RCS-77-039, November, 1977.
  93. Madni, A.M. “Simulation Error Models for RF Navigation Sensors,” Rockwell International, Space Division, Technical Report, June, 1977.



Referee

  • Reviewed books, technical papers and proposals for the following journals, agencies, and organizations:
  • Rand Corporation
  • IEEE Systems, Man, and Cybernetics
  • IEEE Computers
  • Conference for Systems Engineering Research
  • Transdisciplinary Journal of Integrated Design and Process Science
  • Systems Engineering Journal: The Journal of the International Council of Systems Engineering
  • National Science Foundation
  • Carnegie Mellon University Software Engineering Institute


Return to Index